Please use
Anest Iwata's genuine oil for long lifetime of compressors.
There are three sizes, 0.5, 1.0 and 1.5 liters.
Anti-dust
filter kit
(fitted
to 5.5kW and above as standard accessory)
A good installation site is ideal to operate
compressors without any trouble for a long time. But when
you are forced to operate compressors at a dusty site,
you are recommended to use our anti-dust kit which prevents
dust from entering through open section of crankcase,
resulting in protection of inside parts such as bearings.
Model
Applicable
basic compressor
OCX-944
F15-10
OCX-948B
F22-10, F37-10
Air
transformers
An air transformer is a combined set of air
filter and air regulator; an economical and compact air
filter.
RR-AP4B
:
The right
outlet (viewed from the front) supplies non-regulated
air from air receiver, and the left outlet supplies
regulated air pressure controlled by pressure gauge.
FR
:
Compact type. It can be
easily fitted anywhere.
RR-A
:
The right outlet (viewed
from the front) supplies non-regulated air from
air receiver, and the left outlet supplies regulated
air pressure controlled by pressure gauge.
RR-AS
:
Both outlets supply regulated
air pressure and increase efficiency.
RR-AT
:
For high pressure use
(0.98Mpa {10kgf/cm2}and above).
Air
transformers which are mounted on compressors.
Model
Connection
Drain
system
Air
flow
(L/min)
Primary
side max. pressure
(MPa)
Remarks
RR-AP4B
G 1/4
manual
780
1.4{14.3}
Air flow is at 0.69MPa primary side
pressure and 0.49MPa secondary side pressure; and
pressure drop is 0.05MPa.
Secondary
side max. pressure
(MPa)
Max.
operating temperature
(liquid temp.)(°C)
Filtration
Applicable
compressors
0.051.13
{0.511.5}
80
20µm
All COMG
tank-mounted
models
Wall
mounted type and separately installed type
Model
Item
FR-102CMG
RR-A
RR-AS
RR-AT
Connection
Rc 1/4
G 1/4
Drain system
Manual
Air flow
(L/min)
180
780
Max. primary pressure
(MPa)
1.4{14.3}
0.97{9.9}
1.4{14.3}
Secondary pressure
range
(MPa)
0.040.83
{0.48.5}
0.050.78
{0.58}
0.051.13
{0.511.5}
Max operating temp.
(°C)
65
80
Element
filter
(µm)
20µm
Remarks
Air flow is at inlet pressure
0.69MPa, setting pressure 0.49MPa and pressure
drop of 0.05MPa.