ANEST IWATA Corporation
CHINESE CHINESE JAPANESE JAPANESE contact us contact us site map site map
Products Solutions Company Profile IR Information HOME
HOME >> Products >> Compressors >> Compressor >> SCD-K
Compressors Products Information

SCD-75K(D)/110K(D) Screw Compressors

SCD-75KD

*Some models may not be available for sales in certain countries.
Features
The largest free air delivery in Japan (75kW type)
· Free air delivery has increased 6 8% compared with previous models due to high performance air end.

Low noise level
· Low noise level achieved by separate type low noise cooling fan and improved packaging.

Improved maneuverability
·
·
Equipped with external output of remote control and general shutdown
Pressure difference between max. pressure and min. pressure can be adjusted to a minimum 0.01MPa.

Specifications (air cooled type)

Model
Item SCD-75K
<SCD-751K>
«SCD-752K»
SCD-75KD
<SCD-751KD>
«SCD-752KD»
Compressors Exhaust Pressure
(MPa)
0.7<0.95>«1.25»
Gas to intake, pressure, temperature
(°C)

air, atmospheric pressure 0 40°C

(air, atmospheric pressure 2 40°C in built-in dryer type)

Free air delivery *1
(m3/min)
1.3<1.0>«0.8»
Drive System V belt driven
Capacity control system fine dual control (step control + back pressure drop + automatic start and stop)
Outlet air temperature
(°C)
intake temp+14 intake temp+7
Air outlet
(B)
1/2
lube oil capacity
(L)
4.8
Noise level *2
(dB(A))
57
Compressor motor start-up system star-delta system
type *4 totally-enclosed fan-cooled type, 3-phase, 2-pole,
F class insulation,IP55
output *5 7.5(service factor1.2/1.25)
Air dryer model air dryer outlet air dew point*6 (°C) - less10
(under pressure)
air dryer electric consumption
(kW)
- 0.5
refrigerant - HFC134a
Outer dimensions *7
((W×L×H)(mm))
1027×638×1212
Mass (with oil)
(kg)
224 254


Model
Item SCD-110K
<SCD-1101K>
«SCD-1102K»
SCD-110KD
<SCD-1101KD>
«SCD-1102KD»
Compressors Exhaust Pressure
(MPa)
0.7<0.95>«1.25»
Gas to intake, pressure, temperature
(°C)

air, atmospheric pressure 0 40°C

(air, atmospheric pressure 2 40°C in built-in dryer type)

Free air delivery *1
(m3/min)
1.7<1.5/1.4>«1.2»
Drive System V belt driven
Capacity control system fine dual control (step control + back pressure drop + automatic start)
Outlet air temperature
(°C)
intake temp. + 17 intake temp. + 10
Air outlet
(B)
1/2
lube oil capacity
(L)
4.8
Noise level *2
(dB(A))
60
Compressor motor start-up system star-delta system (3 conductors)
type *4 totally-enclosed fan-cooled type,
3-phase, 2-pole, F class insulation,IP55
Rated output *5 11(service factor1.2/1.25/1.2)
Refrigerated air dryer air dryer outlet air dew point*6 (°C) - less10
(under pressure)
air dryer electric consumption
(kW)
- 0.7
refrigerant - HFC134a
Outer dimensions *7
((W×L×H)(mm))
1027×638×1212
Mass (with oil)
(kg)
237 272
*1 Air delivery means average discharge air volume under loaded condition 0.7 (0.95) «1.25» Mpa converted into atmospheric pressure.
*2 Noise level means representative figure measured in an anechoic room at 1.0 meter height and 1.5m distance from front at exhaust pressure of 0.7Mpa during full-load operation.
*3 Rated voltage of 60Hz can be used for both 200V and 220V.
*4 IP55 means class of dustproof and waterproof performance based on JIS standard (C4034-5).
*5 S.F. means service factor (permissible range) of motor.
*6 Air outlet dew point shows when ambient temperature is 30°C and relative humidity is 70%.
*7 Dimensions show outer dimensions of the package without extruding sections such as valve.
*8 Please select air receiver capacity over 200L for 7.5kW type and 400L for 11kW type.
*9 As specifications differ between 50Hz and 60Hz, you cannot use it at different Hz site.

Compressors TOP
Product Lineup
Compressor
Recipro
Scroll
Screw
Options
Dryers
Reference
Conversion chart
PAGE TOP PAGE TOP
copyright (c) 2004 ANEST IWATA Corporation All rights reserved.