ANEST IWATA Corporation
CHINESE CHINESE JAPANESE JAPANESE contact us contact us site map site map
Products Solutions Company Profile IR Information HOME
HOME >> Products >> Painting equipment >> Product Lineup >> W-101BPG
Painting equipment Products Information

Spray guns for automotive refinishing - B-Sho Series
W-101-134BPG W-101-142BPG
*Some models may not be available for sales in certain countries.
Features

Lineup of spray guns for automotive refinishing.
These spray guns do not spray uneven film thickness(spray stripes).

(gold): W-101-134BPG:exclusive spray guns for metallic and pearl paints.
(silver): W-101-142BPG:exclusive spray guns for solid clear paints.

Specifications
  Model
Item W-101-134BPG W-101-142BPG
type of feed gravity gravity
fluid nozzle orifice mm
1.3 *2 1.4
atomizing air pressure
MPa *1		 0.2 0.24
air consumption L/min
160 230
fluid output mL/min
140 200
pattern width mm
250 270
high atomization
general atomization    
applied air cap model BP4 BP2
required air compressor kW
1.5 1.5
mass g
295
application metallic/pearl paints solid clear paints
*1.Atomizing air pressure is pressure at gun inlet when air flows with trigger pulled.
*2. W-101-134BPG is assembled with special fluid nozzle.
All models: fluid nipple G1/4, air nipple G1/4.
Fluid viscosity is 12 sec/NK-2 for automotive refinishing paints.

Spray guns for automotive refinishing - B-Sho Series [B.B]
W-50-124BPG W-101-162BPG
*Some models may not be available for sales in certain countries.
Features
W-50-124BPG: exclusive spray gun for top coat of small area
W-101-162BPG: exclusive spray gun for base coat

Specifications
  Model
Item W-50-124BPG W-101-162BPG
type of feed gravity gravity
fluid nozzle orifice mm
1.2 1.6
atomizing air pressure
MPa *1		 0.15 0.20*2 0.24*3
air consumption L/min
70 210 230
fluid output mL/min
85 120 195
pattern width mm
160 170 200
high atomization
general atomization    
applied air cap model 50 162
BP2
required air compressor kW
0.4 1.5
mass g
185 295
application automotive refinishing paint for primer, surfacer
*1.Atomizing air pressure is pressure at gun inlet when air flows with trigger pulled.
*2.Paint viscosity is 40 sec/NK-2 when primer and surfacer are used.
*3.Paint viscosity is 20 sec/NK-2.
All models: fluid nipple G1/4, air nipple G1/4.
Fluid viscosity is 12 sec/NK-2 for automotive refinishing paints.


Painting equipment TOP
Product Lineup
Spray gun
Paint supply equipment
Environment friendly equipment
Airbrush
Classification by industries
Automotive industry
Automotive refinishing
Painting metals
Painting plastics
Woodwork painting
Painting ironwork and bridges
Painting building
Conversion chart
PAGE TOP PAGE TOP
copyright (c) 2004 ANEST IWATA Corporation All rights reserved.