LPH-200/300/400<Products | Painting equipment | Product Lineup>

*Some models may not be available for sales in certain countries.

Spray guns for large workpieces such as large parts or vehicles

	Features

You can reduce paint consumption due to high transfer efficiency. It can also contribute to health protection of painters.

	Specifications

LPH-200 series

	Model
Specifications	Large LPH-200-122P
Previous model	LPH-90-121, LPH-90-122
Type of feed	Pressure
Fluid nozzle orifice (mm)	1.2
Atomizing air pressure (MPa)	0.20
Pressure in air cap (MPa)	0.07
Air consumption (L/min)	500
Fluid output (mL/min)	500
Pattern width (mm)	300
High atomization
Applied air cap model	G2
Required air compressor (kW)	2.2 3.7
Mass (g)	380
Applications	Large workpieces such as large parts, vehicles

	Spray distance: 200mm
	Paint viscosity 20 sec./NK-2. * marked ones are 12 sec./NK-2
	Fluid nippleG; 3/8, Air nipple; G1/4

*Some models may not be available for sales in certain countries.

For automotive refinishing etc.

	Features

·	As cup is situated at the top of spray gun, well-balanced center of gravity assures good fit to human hand.
·	With well-dispersed mist, you can get uniform film of water borne or high-solid paints which have been considered difficult to paint up to now.

	Specifications

LPH-300 series

	Model
Specifications	LPH-300-124LV	LPH-300-144LV	LPH-300-164LV
Type of feed	Gravity
Fluid nozzle orifice (mm)	1.2	1.4	1.6
Atomizing air pressure (MPa)	0.1		0.13
Pressure in air cap (MPa)	0.05		0.07
Air consumption (L/min)	200		240
Fluid output (mL/min)	90*	130*	110
Pattern width (mm)	210	230	230
High atomization
Applied air cap model	LV 4
Required air compressor (kW)	1.5 2.2
Mass (g)	320
Applications	Automotive refinishing (touch-ups block painting)

	Spray distance: 200mm for LPH-300/400
	Paint viscosity 20 sec./NK-2. * marked ones are 12 sec./NK-2
	fluid nipple: G1/4(female), air nipple: G1/4

LPH-400 series

	Model
Specifications	LPH-400-144LV	LPH-400-164LV
Type of feed	Gravity
Fluid nozzle orifice (mm)	1.4	1.6
Atomizing air pressure (MPa)	0.11
Pressure in air cap (MPa)	0.07
Air consumption (L/min)	270
Fluid output (mL/min)	130	150
Pattern width (mm)	290	300
High atomization
Applied air cap model	LV 4
Required air compressor (kW)	1.5 2.2
Mass (g)	380
Applications	Automotive refinishing (touch-ups block painting) base coat, top coat, clear coat

	Spray distance: 200mm
	Paint viscosity 20 sec./NK-2.
	Fluid nipple: M16×1.5(male), air nipple: G1/4