Electrostatic hand spray gun for water-base paint <Products | Painting equipment | Product Lineup>

HOME >> Products >> Painting equipment >> Product Lineup >> Electrostatic hand spray gun for water-base paint

*Some models may not be available for sales in certain countries.

	Features

External discharging system with excellent safety

	Maintaining high transfer efficiency despite external charging system
	No need of insulation unit in paint supply route
	Far lower electrostatic capacity in comparison with direct charging system (compared with insulation stand specifications)

Compact and excellent handling, similar to air spray gun

	Compact and almost the same size as normal air spray gun
	Well-balanced design with excellent handling
	No need of electrostatic fluid hose for water-base paints. Normal fluid hose can be used.

Excellent in maintainance

Electrode section can be replaced with one touch.

Main safeguard function

	Detection of ground failure
	Detection of overcurrent
	Detection of disconnection of shielded wire and cable core
	Detection of time limit

	Specifications

Electrostatic hand gun for water-base paints

E-SC24 Electrostatic controller

	Model
Item	E-SC24
input voltage	AC100V-120V 50/60Hz single-phase (can be changed to 200-240V single-phase)
output voltage	MAX DC24V (electrostatic controller)
output current	MAX 150μA (electrostatic gun discharge current)
electric consumption	about 75W
dimensions (mm)	W245 x L160 x H130
mass	about 3.4kg
charge ON/OFF mechanism	air flow switch type (air joint IN/OUT size G1/4)
max. operating air pressure	MAX 0.68MPa