| function |
Out
of plural connected electrostatic air hand guns,
only one gun to be used (to spray) is charged.
*Plural guns cannot be charged at the same time. |
| specifications |
Applicable
electrostatic
air hand gun |
E-spray
series
(E-M15B/10B type electrostatic air hand gun) |
| number of guns to be connected |
5 sets |
| input voltage |
AC100 200V
50/60Hz single-phase
(200240V
can be changed to single-phase specifications) |
| output voltage |
MAX DC12V (electrostatic controller) |
| output current |
MAX 100μA
(dicharge current of electrostatic air hand gun) |
| protective function,
safety function |
detection of ground failure |
|
detection of overcurrent |
|
detection of shielded wire disconnction |
|
detection of time limit |
|
detection of two-gun charging |
|
function to avoid metallic bridge problem |
| dimensions W x L x H |
500mm x 300mm x 700mm (5- gun specification) |
| max. operating pressure |
MAX 0.68MPa |
| charge ON/OFF mechanism |
air flow switch system |
![[E-MC12 (electrostatic multi-gun controller)]](images/emc12_ph01.jpg)
Specifications
Electrostatic related equipment
